Raw Materials

Steel in coils, indicated by "X" in the chart below, are purchased in large quantities and stocked by KMC. Parts made from these sizes provide fastest delivery and lowest cost. Sizes shown but not identified with an "X" are available on short delivery and at favorable prices.

All gages and widths in all materials can be furnished, but some may require purchase for your order (minimum purchase requirements may affect piece prices).

Suffix to be added to part number for material and finish:
Z1 = Hot Dipped Galvanized Steel, Chem Treated G90
Z2 = CRCQ Steel, .0002 min. Zinc w/Clear Chromate
G1 = CRCQ Steel, .00015 min. Zinc w/Yellow Dichromate
G2 = CRCQ Steel, .0002 min. Zinc w/Yellow Dichromat

Availability of Raw Material

Nominal ± Type of Material Carbon Temperature Coil Widths
.375 .437 .500 .625 .750 .875 1.000 1.125 1.250 3.500
.025 .002 C.R. 1008-1010 RB65MAX.     • •            
.025 .001 G90 1008-1010 RB65MAX.     •              
.026 .002 Spring Steel 1050 RB84MAX.   •                
.032 .002 Spring Steel 1050 RB84MAX.     •              
.032 .002 C.R. 1008-1010 RB65MAX. •   • • • • • •    
.032 .002 G90 1008-1010 RB65MAX.     • • •          
.042 .002 C.R. 1008-1010 RB65MAX.             •      
.048 .002 C.R. 1008-1010 RB65MAX.     • • • • • •    
.048 .002 G90 1008-1010 RB65MAX.     • • •   •      
.060 .002 C.R. 1008-1010 RB65MAX.     • • • • • •    
.060 .002 G90 1008-1010 RB65MAX.       • •   •      
.074 +.001/-.004 HRP&O 1008-1010 RB65MAX.         •   •      
.090 +.001/-.004 HRP&O 1008-1010 RB65MAX.         •          
.104 .004 HRP&O 1008-1010 RB65MAX.             •   •  
.120 .004 HRP&O 1008-1010 RB65MAX.         •   •   •  

Symbols in Chart:
G90 - HD Galv., Chem Treated       C.R. - Cold Rolled       HRP&O - Hot Rolled Pickled and Oiled